High Pressure Resistance 4.2x2.2mm Injection Molding Electrical Heating Coil with Male Plug

Place of Origin:

Zhejiang, China (Mainland)

Product Detail

Model No.: -

4.2x2.2mm Injection Molding Heaters Coil with Male&n

4.2x2.2mm Injection Molding Heaters Coil with Male Plug

1. Heaters Coil Brief Introduction

Wuhan Global Metal hot runner coil heater use Germany heater wire, United States high purity magnesium

oxide material, and strict process technology. There are various cross section and size for choice, such as

square, round and flat, provide high performance electric heater for heating hot runner mold and other fields.

Heater maximum temperature up to 650 ºC, the integration of temperature thermocouple for the precise

temperature control, can provide K, J, E thermocouple, blasting and blackening surface treatment, also can

provide bright surface.

2. Heaters Coil Characteristics

a. The inside insulated cover, same as the German GC.

b. High insulation (more than 500M ohm) and high pressure resistance (1000V above), can meet special

requirement if customers need.

c. Very good performance of the heating uniformity in the heating area.

d. The moisture-proof can be IP65, suitable for working in bad condition.

3. Heaters Coil Application

4. Heaters Coil Parameter.

Spring coil heater (H series)	3.0x3.0 3.3x3.3 4.0x2.0 4.2x2.2 4.5x2.7	Φ3.0	Φ4.0	Φ5.0	3.5x3.5 4.0x4.0	5.0x5.0
Voltage	220V,230V,240V
Power tolerance 115W-200W	+/-10%
Power tolerance 201W-2000W	+5%-10%
Out jacket length	30mm~280mm
Diameter of the inner sleeve/wrapped diameter	10mm~42mm
Unheating length	45mm
Max power density	9W/cm²
Heating Length tolerance	+/-0.05mm
Unheating length tolerance	+/-2.5%
Tolerance ID d ≤20mm	Without inner sleeve:-0.15mm With inner sleeve:0.05mm~0.10mm
Tolerance ID d 20mm~30mm	Without inner sleeve:-0.20mm With inner sleeve:0.05mm~0.10mm
Tolerance ID d ≥30mm	Without inner sleeve:-0.25mm With inner sleeve:0.05mm~0.10mm
Tolerance cross section	+/-0.15mm			+/-0.20mm
Thermocouple	K,J,E					None
Material	304,321,316
Maximum working temperature	650
Die electrical strength	800V			1000V